This is our old location for posting used equipment. Please visit our new bulletin board and community forum, where you can find not only used equipment postings, but lots of other community information! Click here to check it out
Although Bracker’s does not sell used equipment, we do act as a bulletin board and try to match up people wanting to sell with people wanting to buy. We have heard of a few things in the Lawrence, KS area:
- 2 L&L Kilns, $500 for both: Craigslist link
If you have items you are wanting to sell, feel free to email me or use our contact form to send me a message with the details of what you’re wanting to sell and I’ll post it.
Looking for a used Lockerbie or Laguna Kick wheel that is close by. Need a back-up wheel that I can afford. If you hear of any please let me know.
Thanks~Kelly
like new brent model J…$600
Brent cxc w/reverse $1000 used
I am looking for a small, used pug mill in good shape.
Thanks,
Margaret
I know I am looking for the hard to find. I am looking for a nice used electric wheel.
Bluebird Model 12 Clay Mixer with leg set
-used- Meriden, Kansas
$1200.00
Buyer will need to arrange pick-up.
Contact… Mark Ralston
785-484-3331 or mark.ralston@usd340.org
The Bluebird Model 12 Mixer is a scaled down version of the 24S. Not only is the Model 12 excellent for mixing or recycling smaller batches of clay, it is an excellent machine for mixing colored clay bodies or adding special ingredients (such as grog, fiberglass, etc.) to a premixed body. The bucket is stationary but tilted forward to minimize back strain during unloading. The optional leg set is included.
This mixer has had very few hours of use. All parts are in excellent working condition. The motor has plenty of power to mix a full hopper of moist clay.
Listed Prices with leg set… $2050.00 – $2175.00
• Mixing Capacity: 40 lbs dry; 50 lbs wet
• Blades and Shaft: Stainless steel and removable
• Shaft and Bearings: Ball bearings support the mixer shaft; bearings protected from moisture and clay by additional seal between bucket and bearing.
• Safety: On/Off switch mounted within easy reach; protective safety interlock micro-switch stops blade action when cover is lifted; “CAUTION” sign; detailed instruction and maintenance manual included.
• 1/3 hp Motor: Totally enclosed, Fan-cooled
• Dimensions without Legs: 28.75″H x 24″W x 28″D
• Dimensions with Legs: 40″H x 24″W x 28″D
Kilns for sale,
two propane gas kilns, one is 16 cuft the other about 21 cuft. Second has never been fired, hoods for both soft brick kilns. six burners with each kiln. Email with questions and can send some pictures if needed. Thanks Jeff
Setting up a new studio, can you send me details about your kilns for sale?
Looking for Creative Industries repair information and / or used parts.
Looking for a working, used wheel for a beginner.
I have a used, two burner, propane gas fired, forced air kiln burner for sale. I am asking $700.00 for the unit.
SPECS: 22 1/2 inches between burners, center to center.
11 inch, length of burners. 21 1/2 inches, distance from blower to burner.
1/3 hp, 115 volts – 7.2 amp motor.
45 inches over-all.
25 1/2 inchs: width of unit at widest point,(burners).
Please contact me directly at snowyowlbp@aol.com or 785-862-9428.
Thanks,
Jay…